Turbelle® stream electronic
Turbelle® stream electronic is a speed-controlled pump operating on safety extra-low voltage, to be employed ideally in every aquarium from 85 to > 3,000 litres (52.8 to > 792.5 USgal.) for simulation of lapping waves or tidal currents. It contains a new microprocessor-controlled motor and thus can be called an "intelligent pump":
The electronic motor adapts its speed automatically to the pump load and always seeks the best efficiency at the lowest possible consumption of energy. This energy consumption is about fifty per cent lower than in conventional pump motors. The pumps will be stopped immediately in case of blockage. After the blockage has been removed, the pumps will start up automatically after a delay of 20 seconds.
The pump driver has been provided with a fish care function, which causes a revolution of the screw every twenty seconds when the pump is at a standstill.
It can be controlled by Multicontroller 7095, 7096 as well as Wavecontroller 7092.
Flow rate 6105: 1.01 - 1.02 m/s
Flow rate 6155: 0.72 - 0.73 m/s
||Low motor heat
||Includes Magnet Holder
||Includes Silence clamp
||Controllable speed, wave simulation, tidal currents
Turbelle® stream 6255 (6255.000)
for tanks > 4.000 l (1,050 USgal.)
Flow performance: 5,000 to approx. 18,000 l/h (1,300 to 4,800 US gal./h)
Energy consumption: max. 58 W
Power supply unit:100-240V/50-60Hz
Length of cable: 5 m (196.8 in.).
Dimensions: ø90 mm (3.5 in.), output: ø75 mm (3 in.)
Magnet Holder with Silence Clamp with pane thickness up to 27 mm (1.06 in.).