Seachem Reef Salt - 50 gallon mix Bag (Case of 3)
Reef Salt is a chemically sound blend of salts designed to replicate natural reef waters. It is specifically formulated for the reef environment and will provide ideal seawater concentrations of magnesium, calcium, and strontium with proper alkalinity and pH for closed reef aquarium systems. It contains all essential major, minor, and trace components found in natural reef waters, but contains no toxic or non-essential components such as nitrate, phosphate, silicate, arsenic, cadmium, or beryllium. Reef Salt dissolves quickly and completely and is ready to use in only a few minutes. Reef Salt will support and promote enhanced calcium and alkalinity stability for those wishing to maintain calcium above Natural Sea Water (NSW) levels (400 mg/L) as well as providing NSW levels of bromide (65 mg/L).
For marine only environments, use Seachem Marine Salt instead. It is specifically designed to meet the requirements of a marine only (not reef) system.
189 L (50 gallons)
Directions for use:
Typical Ionic Concentrations
- 1. Mix Reef Salt with dechlorinated tap or purified water. We recommend the use of a commercial dechlorinator like Prime to neutralize any tap water chlorine and/or chloramines. If source water quality is extremely poor we recommend purification with a Seachem Pinnacle RO/DI system.
NOTE: To prepare small quantities, use 34 g of Reef Salt per each liter (1/2 cup per each US gallon) of water.
- 2. Stir well to ensure a good mix. Although the Reef Salt solution may be used immediately, we suggest aerating the water until it achieves oxygen/carbon dioxide equilibrium.
- 3. Measure specific gravity. Recommended range is 1.020 to 1.025 at 24 C (75 F).
NOTE: 675 g of Reef Salt is formulated to create 20 liters (1.4 lbs per 5 US gallons) of saltwater at a specific gravity of 1.021.
- 4. Adjust salt level accordingly. If specific gravity is too low, add more Reef Salt. If too high, add more dechlorinated or purified water.
- 5. Change 20% of aquarium water every 2 weeks (or as necessary) to maintain optimum water quality.
NEVER mix salt in an aquarium containing animals. In New Aquariums: Transfer animals to the aquarium AFTER salt is completely mixed and aerated and specific gravity has been adjusted. Use Seachem's Stability to avoid new tank syndrome and prevent unnecessary animal losses in a new system.
Reef Salt is not for human consumption. Keep out of reach of children. Contact in dry form may cause skin or eye irritation. In case of eye contact, completely flush eye(s) with cool water and seek medical attention.
Depending on specific gravity, alkalinity should be about 4.0 to 5.0 meq/L, calcium should be between 380 to 430 mg/L, magnesium should be between 1200 to 1350 mg/L, and strontium should be 8 to 12 mg/L. Between water changes some elements may become depleted through utilization. Seachem offers a full line of reef supplements for restoring and maintaining many parameters, including (but not limited to) calcium, magnesium, strontium, iodide and alkalinity.