Tesla® X Series 72 Watt CREE™ LED Aquarium Light with (24) 3 Watt High Output LED's

Detailed Description of Intelligent Programmable Controller:

From a functional standpoint, these systems offer maximum controllability, with 4 programmable light stages, including: (Sunrise, Daylight, Sunset, and Moonlight). In addition, there is an intensity level setting for each mode, which simulates the natural cycle of the sun/moon... designing your lighting schedule made easy!

See the below example, of designing your lighting schedule: (Dawn to Dusk) Increase or decrease the intensity as you wish.

1. You could choose to begin the day, (e.g. wake-up phase) with 0% white led light, 2% blue led light, and 50% moonlight, for approximately a period of 1 hr.

2. You may then want your aquarium to start entering more of a dawn phase, whereas you introduce 30% white led light, increase the blue led light to 10%, and moonlight to 30%

3. You may continue on like this, with a variety of different lighting phases throughout the beginning part of the day, then you'll start entering into a more normal daytime phase, which may be along the lines of 100% white led light, 40% blue led light, and 0% moon light.

4. For your Dusk effect, Sun Down, you may want to repeat the exact opposite of the above, with the moonlight being the only leds left on throughout the night.

The major benefit of having this controllability, is that you can bring out the most vivid colors, emphasizing certain fluorescent colors at certain times of the day, and thus constantly presenting an ever changing vision to onlookers. Isn't this part of the reason we got into keeping a saltwater coral reef aquarium in the first place! Don't forget that you can instantly dim your lighting to introduce new corals and fish, then with a push of a button on your wireless remote, your system will return back to your predetermined settings.

In conclusion, your lighting configuration solely depends on your particular aquarium application, in regards to what you have in your tank, and what you want to achieve. We sincerely hope this shows the level of precision to which you can set your lighting schedule. The Sky's the limit.. no pun intended!

Approx. PAR Test Measurements on a 24", 36", & 48" depth: (90 degree lens)
48": average of 260
36": average of 322
24": average of 500


Quality Control:
All LED products offered from OCReef.com, have been tested by us and have met or exceeded our high expectations, or we simply wouldn't sell it! We test all critical components in-house including PAR output, heat output, and electricity consumption, after a 24 hour burn in period for each unit, to ensure that each unit is of the highest quality. 1 year factory repair warranty against defects.

If you disassemble most other LED units sold on the market to date, you will notice that after 2 to 4 years many will most likely begin to have integrity issues, like internal corrosion. You can see that all use mass produced, inferior PCBs, drivers, and electronics, that will vastly lose efficiency, often 40% just in the first 2 years. If you disassemble one of our units, you'll see the clean sealed welds, the plated connectors, protection tubes, and the all aluminum superior APCB, along with a full length active cooled heat-sink.







Heat Demonstration Video.↓
For more information on CREE LEDs visit: Creeledrevolution.com.

*Specifications Subject to Change